Wall Mounted Acrylic Photo Frame
Stud-mounted acrylic that sits on the wall securely, with clear advice for brick, concrete and drywall.
- Stainless-steel studs included on eligible sizes from 12×18 inches
- Clear fixing advice for brick, concrete and drywall
- Template-friendly layout for neat spacing and alignment
- Stays flat on the wall without a bulky back frame
From ₹453 · 3mm & 5mm acrylic
A wall mounted acrylic frame is held by studs rather than a hook or a wire. Small stainless-steel studs pass through holes near the corners of the panel and into plugs in the wall, and caps on the front finish the look. The method is simple, but it rewards a little planning, because the studs are fixed points and a mistake in a drill hole cannot be moved.
Know your wall first, and do it before you place the order. Brick and concrete, common in most Indian flats, take a drill and a plastic wall plug well, and hold large panels securely. Plastered drywall and gypsum partitions are lighter and need proper hollow-wall anchors. Wooden panelling needs screws that reach a solid backing. If you are unsure, tap the wall: a hollow sound means a partition, and you should take extra care or ask a handyman.
Studs are included on eligible sizes from 12×18 inches and above, so you do not need to buy hardware for most pieces. For smaller sizes, choose a shelf instead. Mark the position with a pencil, use a spirit level, and drill with a masonry bit at the right depth. Take your time, because a patient half hour at the start saves a great deal of patching later. Our hanging guide shows the full sequence, and large frames may need two people.
Choosing the right plug and drill for brick, concrete and drywall
For brick and concrete, use a masonry bit with a hammer drill, a plastic wall plug sized to the stud and a slow, steady pace. Stop when the depth matches the plug. For plastered brick, check that the plaster is solid and not crumbling. Damp patches near bathrooms or window sills are poor locations, and so is any wall that shows salt marks in the monsoon, because plugs hold badly in crumbling plaster.
For drywall or gypsum, use a hollow-wall or toggle anchor rated for the weight of the panel. A 5mm panel at 24×36 inches is heavy for a thin partition, and the weight pulls at the anchors every day. If the wall cannot support it, mount into a stud behind the board or choose 3mm and a smaller size.
Spacing, height and weight: how to plan before you drill
Cut a paper template the same size as the panel and tape it to the wall. Check the height with a friend standing back. A standard centre height is about 145 cm. For a pair, keep the gap between 5 and 8 cm. Mark each stud position through the holes, then level before drilling.
Weight rises quickly with size and thickness, so check your wall type against the panel. A small 3mm piece is light enough for any properly fixed wall, while a large 5mm panel deserves solid masonry and good plugs. Never mount above a bed headboard unless you are certain of the fixings.
Acrylic Frame Inspiration
Real PrintPosters acrylic prints — glossy finish, 12-colour HD, 3mm & 5mm options.
Popular Photo Ideas & Use Cases
Best For
- A living room portrait fixed to a brick wall in a new flat
- A reception frame mounted on a concrete pillar or an office partition
- A bedroom frame placed away from the bed on a solid wall
- A rented flat where you want neat, minimal wall holes
- A gallery wall of several matched frames in a hallway
Photo Ideas
- A tall family portrait for a narrow strip between two doors
- A wide landscape that suits a long, empty wall
- A wedding photograph for the wall above a console table
- A matched pair of pet or child portraits at equal height
- A single large vertical image for a staircase wall
- A set of three travel photos, aligned along one line
Best Places to Display
Sizes that are practical to wall mount
Studs are included on eligible sizes from 12×18 inches and above. The bigger the frame, the more the wall type matters.
| Size | Best For |
|---|---|
| 12×18" | Smallest size with studs, light enough for almost any firm wall. |
| 16×24" | Easy for one person to hang on brick or plaster. |
| 20×30" | Largest 3mm size; use a hammer drill on concrete. |
| 24×36" | Needs 5mm and solid plugs; two people recommended. |
| 30×40" | Heavy; use masonry plugs and a level, not drywall anchors. |
| 36×48" | Best on concrete or solid brick with proper wall plugs. |
Live 3mm & 5mm pricing on acrylic photo frame product page.
Interior & Placement Tips
- Always use a spirit level and measure from the floor, not the ceiling, because ceilings are often not level in older buildings.
- Avoid mounting right above a kitchen hob or in a damp bathroom, where heat, oil and moisture build up.
- Keep the paper template on the wall for a day to confirm the position before you drill.
Product Specifications
How It Works
-
1
Upload Photo
Upload from phone or computer — JPEG, PNG, and more.
-
2
Quality Check
Automatic resolution and blur detection before checkout.
-
3
Live Preview
Preview your acrylic frame in 3D before you order.
-
4
12-Colour Print
HD printing on premium 3mm or 5mm acrylic.
-
5
Inspection
Every frame checked for colour accuracy and edge finish.
-
6
Secure Packing
5-layer protective packaging for safe transit.
-
7
Delivery
Pan-India shipping to your doorstep, free above ₹300.
Preview Your Photo on the Wall
Upload your image on our acrylic product page and use live 3D preview to see how your wall mounted acrylic photo frame looks before you order. Our quality checker recommends the best size from your photo resolution.
- Room visualization
- AI size recommendation
- 3mm & 5mm options
Customer Reviews
Rated 4.8/5 (800+ Google reviews) · Verified acrylic photo frame orders
★★★★★"Crystal clear acrylic finish. The print looks premium and glossy. Worth every rupee."
★★★★★"The acrylic photo frame quality is outstanding. The print looks very sharp and the glossy finish gives a premium feel."
Frequently Asked Questions
Should I choose 3mm or 5mm acrylic?
3mm is lightweight and goes up to 20×30 inches. 5mm has a thicker feel and is the choice for larger displays, up to 48×96 inches.
How long does an acrylic frame take to arrive?
Production is typically 1–3 working days after payment and file check. After dispatch, metro locations usually take 2–5 days and other locations 4–8 days.
What photo resolution do I need?
Higher resolution gives a sharper print, especially at large sizes. The upload step checks your photo and warns you if it is too small for the size you picked.
Does the frame come ready to hang?
Stainless-steel studs are included on eligible sizes from 12×18 inches and above. Smaller sizes suit a shelf or table.
Do the studs come with the frame or must I buy them?
Stainless-steel studs are included on eligible sizes from 12×18 inches and above. You still need a drill, a spirit level and suitable wall plugs for your wall. For smaller frames, a shelf or table display is the easier choice, and no drilling is needed.
Can I mount an acrylic frame on a gypsum or drywall partition?
Yes, but use proper hollow-wall anchors or fix into the stud behind the board. Ordinary plastic plugs will not hold in thin board. A small 3mm panel is fine, but a large 5mm panel is heavy, so consider moving it to a brick wall.
Will drilling holes damage a rented flat's wall?
Yes, studs need small drilled holes, which a landlord may notice. These can be filled with putty when you leave. If you cannot drill at all, display a smaller frame on a shelf or sideboard instead, since it needs no fixing.
How do I find the right height?
Tape a paper template the same size as the frame to the wall and look at it from the sofa or the doorway. The centre at about 145 cm from the floor works for most rooms. Lower it a little if the frame hangs above furniture.
Is it safe to mount in a bedroom above the bed?
Only with solid fixings in brick or concrete, and preferably not directly above the pillow. A heavy frame is a risk if it ever falls. When in doubt, hang it on a side wall or choose a lighter 3mm panel with a smaller size.
What if I drill in the wrong place?
Fill the hole with putty or wall filler, let it dry, repaint, and mark again with the template. Measure twice and level before you drill. If the stud holes in the panel do not line up with your marks, stop and re-measure rather than forcing it.
Ready to Print Your Acrylic Photo Frame?
Upload your photo, preview in 3D, and order with free shipping above ₹300.
Continue with Google
Continue with Facebook