1.Product 3M IJ 180 C

 Product Description

•   For Solvent, UV, and Latex Inkjet printing

•   2-mil, white, vinyl film with a luster finish

Product Features

•   Excellent hiding power

•   Pressure-activated adhesive for easy sliding, tacking, snap-up and repositioning

•   Flexible; conforms to compound curves, corrugations and rivets

•   Many finished graphic constructions can be stretched up to 130% (i.e., a 10 inch [25 cm] piece of film can stretch to 13 inches [33 cm]) without primer or relief cuts and maintain lift resistance;

•   Films IJ180C and IJ180Cv3 have Comply™ Adhesive air release channels for fast, easy, bubble-free installations

•   Film IJ180Cv3 air release channels are non-visible and have improved air release

•   Removable with heat and/or chemicals

•   Expected Performance Life of 10 years (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical, outdoor surface)

Recommended Types of Graphics and End Uses

•   Walls, indoor and outdoor graphics and signs, including point-of-purchase and displays

•   Wraps for vehicles, straight trucks, semi-trucks and semi-trailers; emblems or striping

Horizontal vehicle wraps when protected with 3M overlaminates

•   Watercraft graphics (above the static water line only)

•   Bus graphics

•   Small format original equipment manufacturer’s (OEM) decorative and identification graphics, cautionary and safety labeling

Rate per Sq Feet Rs. 130

With Foam Board Rs. 150

 

 2.Technova WPG 7213

 Features & Benefits

High Gloss PVC base makes this film excellent for signage

  • High ink limit ensures vibrant color gamut and vivid displays
  • Natural whiteness for high color contrast
  • Good sheet stability & lay flatness for ease of conversion and application
  • Excellent adhesion to a variety of substrates for wide range of applications
  • Siliconized double sided PE coated paper liner for excellent flatness

Product Specifications

Base: Soft monomeric calendared PVC Film

Base Thickness: 80 microns (± 5 micron)

Finished product weight: 250 ± 20 gsm

Surface Finish: Gloss, 70% gloss value at 60°

Adhesive: Permanent Clear solvent acrylic adhesive

Liner: 120 gsm double side PE coated siliconized paper

Initial Adhesion :9-12 N / inch

Ink Compatibility: Eco-solvent & Solvent inks

Ink Limit: Around 350% with original inks

Shelf-Life:One year from the date of manufacture when stored in original packing at 20-25°C and 50% RH

Durability of Media

The durability of the printed image is dependent on the fading characteristics of the inks used. Please consult the ink manufacturer for technical advice

If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction, it is strongly recommended that the prints are laminated with a UV stabilized vinyl lamination media with a solvent-based adhesive

This media, when printed and protected as indicated above (with a laminate), can have an image life expectancy of up to 6 months

Rate per Sq Feet Rs. 85

With Foam Board Rs. 100

 

3. Pigment based HD quality photo printing with a Resolution of 4800 DPI on Imported Vinyl Roll

Rate per Sq Feet Rs. 130

With Foam Board Rs. 150

 

4. Local Vinyl Media with a life of 6 months

Rate per Sq Feet Rs. 65

With Foam Board Rs. 85